LG 55eg9600 Instruction Manual page 10

10 _NSTALLAT_ON PROCEDURE
/ ASSEMBLING AND PREPARING
INSTALLATION PROCEDURE
1 Open the package and make sure all the accessories are included.
2 Attach the stand to theTV set.
3 Connect an external device to the TV set.
4
Make sure the network connection is available.
You can use theTV network functions only when the network connection is made.
* When the TV is turned on for the first time after being shipped from the factory, initialization of the TV may
take approximately one minute.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local dealer
where you purchased your product.The illustrations in this manual may differ from the actual product and
item.
[-i inc _ CAUTION
Do not use any unapproved items to ensure the safety and product life span.
Any damages or injuries by using unapproved items are not covered by the warranty.
ase of some model, the thin film on screen is a part of TV, So don't take it off.
_-@
NOTE
The items supplied with your product may vary depending upon the model.
Product specifications or contents of this manual may be changed without prior notice due to
upgrade of product functions.
For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39
inches) thick and 18 mm (0.7 inches) width.
Use an extension cable that supports USB 2.0 if the USB cable or USB FLASH DRIVE does not fit into
your TV's USB port.
Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen
may not display or a connection error may occur.
Recommended HDMI cable types (3m or less)
- High-Speed HDMIW Mcable
- High-Speed HDMI"W Mcable with Ethernet
_A_ 10 mm (0.39 inches)
_B__ _ 18 mm (0.7 inches)