Table of Contents
Advertisement
Warning! To reduce the risk of serious personal injury, turn
tool off and disconnect radio from power source before
installing/changing battery.
Remove the screw from the coin cell battery door (14).
Remove the door from the radio.
Install the coin cell battery so that the writing on the
u
battery faces out away from the radio.
Replace the battery door and tighten screw.
u
Note: To reset the LCD display (9), clock and pre-sets,
remove the coin cell battery and reinstall. Follow this
procedure if the screen seems to lock in place.
Power/Volume Adjustment
To operate as a corded product
Insert the AC adapter (15) into the AC adapter port (11), then
plug the adapter into an appropriate AC power outlet or
generator.
To operate as a cordless product
Insert a fully charged 18v Stanley FatMax battery (not
included) into the battery port (12). Be sure battery is fully
seated.
Switching on and off
To switch the radio on, press the power button (2).
u
To switch the radio off, press the power button again (2).
u
Press the top volume button (1) to increase the volume. To
u
decrease the volume, press the bottom volume button.
Note: If the battery is attached to the radio and the AC adapter
is plugged in at the same time, the radio will run off the
adapter and not drain the battery. Having both attached
simultaneously will not charge the battery.
Mode Function
To choose one of the mode functions (FM, AM, AUX, or
Bluetooth®) push the mode button (3) until the desired
function is displayed on the LCD screen. For example, if the
radio is on FM, push the mode button two times to change to
AUX.
Tune or Seek Function
Tune
Press the top tune/seek button (8) to quickly move the tuner
up the frequency band. To move the tuner down the frequency
band, press the bottom tune/seek button.
Seek
Press and hold the top tune/seek button (8), then release to
quickly scan up the frequency band to the next available
station. Press and continue to hold the button to seek directly
(Original instructions)
to a desired station. Press and hold the bottom tune/seek
button (8), the release to quickly seek down the frequency
band.
Program the Clock
The clock can be programmed with the power on or off.
Press and hold the equalizer/clock button (6) until the hour
u
then release the equalizer/clock button.
Press the tune/scan buttons (8) up or down to set the
u
hour.
When the correct hour is set, press the equalizer/clock
u
Press the tune/scan buttons up or down to set the
u
minutes.
If you do not press a button within 5 seconds, the clock
u
programming feature will automatically return to the
previous setting.
u
Program the Presets
6 FM and 6 AM radio stations may be independently set. After
programming the buttons, pressing the "1-6" preset toggle
button (4) will instantly change the frequency to the preset
station.
Program the Channels
Turn power on (2).
u
Press the mode button (3) until the desired mode is
u
selected (AM or FM).
Tune the radio to the desired station (see Tune or Scan
u
Function).
Press and hold the set/preset button (5). The "Mem" icon
u
Press the "1-6" preset toggle button (4) to scroll through
u
the 6 presets.
Once it displays the desired preset number, press the set/
u
preset button.
Repeat steps 3 through 6 to set the other memory buttons.
u
Equalizer Button
Set bass and treble
Press the equalizer/clock button (6) once. The base
u
equalizer will appear on the LCD display (9).
Press the up and down volume buttons (1) to set the
u
desired bass level.
Press the equalizer/clock button a second time to get to
u
the treble equalizer.
Press the up and down volume buttons to set the desired
u
treble level.
Press the equalizer/clock button a third time to exit.
u
ENGLISH
5
Advertisement
Table of Contents
