[Screen Setup] Custom Settings; [Custom Setup] - Sony DAV-DZ7T Operating Instructions Manual

x [BLACK LEVEL (COMPONENT OUT)]
(North American, Mexican, and Latin
American models only)
Selects the black level (setup level) for the video
signals output from the COMPONENT VIDEO
OUT jacks.
You cannot select this and the setting is not
effective when the system outputs progressive
signal.
[OFF]
[ON]
x [4:3 OUTPUT]
This setting is effective only when you set [TV
TYPE] in [SCREEN SETUP] to [16:9]
(page 78). Adjust to watch 4:3 aspect ratio
progressive signals. If you can change the aspect
ratio on your progressive format (525p/625p)
compatible TV, change the setting on your TV,
not the system. Note that this setting is effective
only for HDMI connection or progressive
signals output from the COMPONENT VIDEO
OUT jacks.
Note
• This setting is effective only when
"PROGRESSIVE" is selected by using VIDEO
FORMAT (page 22).
[FULL]
[NORMAL]
80
GB
Sets the black level of the output
signal to the standard level.
Raise the standard black level.
Use this when the picture becomes
too black.
Select this when you can change
the aspect ratio on your TV.
Select this when you cannot
change the aspect ratio on your
TV. Shows a 16:9 aspect ratio
signal with black bands on left and
right sides of the image.
16:9 aspect ratio TV
Custom Settings

[CUSTOM SETUP]

Use this to set up playback related and other
settings.
Select [CUSTOM SETUP] in the Setup Display.
For details, see "Using the Setup Display"
(page 76).
The default settings are underlined.
CUSTOM SETUP
HDMI CONTROL:
STB SYNCHRO:
PAUSE MODE:
TRACK SELECTION:
MULTI-DISC RESUME:
AUDIO DRC:
AUDIO (HDMI):
DivX:
x [HDMI CONTROL]
Switches the HDMI CONTROL function on or
off. This function is available when you connect
the system and TV with the HDMI cord. For
details on this function, see the HDMI
CONTROL Guide (supplied separately).
[OFF]
Sets the HDMI CONTROL
function to off.
[ON]
Sets the HDMI CONTROL
function to on.
You can operate mutually
between components that are
connected with the HDMI cord.
Note
• When you set to [ON] without the HDMI connection
of the TV, [Please verify the HDMI connection]
appears and you can not set to [ON].
OFF
OFF
AUTO
OFF
ON
OFF
OFF
Registration Code