[Screen Setup] Custom Settings; [Custom Setup] - Sony DAV-FX999W Operating Instructions Manual

Custom Settings

[CUSTOM SETUP]

Use this to set up playback related and other
settings.
Select [CUSTOM SETUP] in the Setup Display.
To use the display, see "Using the Setup
Display" (page 90).
The default settings are underlined.
x [PAUSE MODE] (DVD VIDEO/DVD-RW
only)
Selects the picture in pause mode.
[AUTO]
[FRAME]
x [TRACK SELECTION] (DVD VIDEO only)
Gives the sound track which contains the highest
number of channels priority when you play a
DVD VIDEO on which multiple audio formats
(PCM, DTS, MPEG audio, or Dolby Digital
format) are recorded.
[OFF]
[AUTO]
Note
• When you set the item to [AUTO], the language may
change. The [TRACK SELECTION] setting has
higher priority than the [AUDIO] settings in
[LANGUAGE SETUP] (page 91). (Depending on
the disc, this function may not work.)
• If PCM, DTS, Dolby Digital sound, and MPEG audio
tracks have the same number of channels, the system
94
GB
Downloaded From TheatreSystem-Manual.com Manuals
CUSTOM SETUP
PAUSE MODE:
TRACK SELECTION:
MULTI-DISC RESUME:
DivX: Registration Code
The picture, including subjects
that move dynamically, is output
with no jitter. Normally select this
position.
The picture, including subjects
that do not move dynamically, is
output in high resolution.
No priority given.
Priority given.
selects PCM, DTS, Dolby Digital sound, and MPEG
audio tracks in this order.
x [MULTI-DISC RESUME] (DVD VIDEO/
VIDEO CD only)
Switches the Multi-disc Resume setting on or
off. Resume playback point can be stored in
memory for up to 40 different DVD VIDEO/
VIDEO CD discs (page 44).
[ON]
[OFF]
AUTO
OFF
ON
x AUDIO (HDMI) (DAV-FX1000W only)
Selects the type of audio signal output from the
HDMI OUT jack.
[OFF]
[AUTO]
[PCM]
Note
• A loud noise (or no sound) will be output if you
connect the system to a TV that is not compatible
with DOLBY DIGITAL/DTS (digital theater system)
signals and [AUTO] is selected. In this case, select
[PCM].
• When you connect the system and TV with the HDMI
cord and [AUTO] or [PCM] is selected, DUAL
MONO, AUDIO DRC, A/V SYNC, DSGX, sound
field, and Karaoke functions are not applied to the
sound that is output from the TV.
x [DivX] (Asian, Australian, and Middle
Eastern models only)
Displays the registration code for this system.
For more information, go to
http://www.divx.com on the Internet.
Stores the resume settings in
memory for up to 40 discs.
Does not store the resume settings
in memory. Playback restarts at
the resume point only for the
current disc in the system.
The sound is not output from the
HDMI OUT jack.
Outputs audio signals that is
matched to the requested audio
stream from the connected TV.
Converts Dolby Digital, DTS
(digital theater system), or 96
kHz/24 bit PCM (pulse code
modulation) signals to 48 kHz/ 16
bit PCM (pulse code modulation).