Using The Pool Cleaner; Setup - K-Bot Saturn SX3 User Instructions

5. USING THE POOL CLEANER

5.1 Setup

Before using the Pool Cleaner for the first time, perform the following steps:
3m/10ft
5.1.1 5.1.2
Position the power supply Unwind the cable and stretch it out completely so that it has
so that it is approximately in the no kinks.
middle of the long side of the
pool at a distance of 3m /10ft.
1
2
5.1.3 5.1.4
Attach the floating cable to the power
Plug in the power supply and leave it in the
supply by inserting it with the notch on the
OFF position.
connector (1), lined up with the groove in
the socket on the power supply, and turning
clockwise (2).
4