Robotic Pool Cleaner
User Instructions
1. INTRODUCTION
2. SPECIFICATIONS
Motor protection: IP 68
Minimum depth: 0.80m / 2.6ft
Maximum depth: 5m / 16.4ft
3. WARNINGS AND CAUTIONS
3.1 Warnings
Use the originally supplied power supply only
Ensure the electrical outlet is protected by a ground fault interrupter (GFI) or an
earth leakage interrupter (ELI)
Keep the power supply out of standing water
CAUTION
Position the power supply at least 3m/10ft away from the edge of the pool
Do not enter the pool while the Pool Cleaner is working
Unplug the power supply before servicing
3.2 Cautions
Use the Pool Cleaner in the following water conditions only:
Chlorine
Maximum 4 ppm
pH
7.0-7.8
Temperature
6-34°C / 43-93°F
NaCl
Maximum 5000 ppm
2
Digital Power supply
Input: 100-130 AC Volts / 200-230 AC Volts
Output: <30 VDC
Robotic Pool Cleaner
50-60 Hertz
IP 54
|
User Instructions