Table of Contents
Advertisement
EN
Smartphone App
User Instructions
1. INTRODUCTION
With FCC ID: WCH99956035
MyDolphin™ is an easy-to-use app for controlling your
Bluetooth®. You can install and operate the app on all the most common mobile devices and operating
systems, specifically iPhone 4 with iOS 6 (and above), and Android 4.4 (and above), including tablets.
*Smartphone control is available only with specific models.
INITIAL OPERATION
Make sure the
's power supply is connected to the pool cleaner and an
electrical outlet, and that the robot is in the pool. Upon initial operation, it will
perform the self-system diagnostic sequence.
ake sure Bluetooth® is active on your smartphone and download and
activate the MyDolphin™ app. Once downloaded, the app searches for and
displays the serial number of the nearest robot
Click on the
serial number displayed on your screen.
Register by entering your email address and creating a password.
Your smartphone will then finalize the Bluetooth® pairing sequence.
3. DASHBOARD SCREEN
Get a quick glimpse of your
The top indicator bar shows functional information, including on-off status,
signal strength and error notifications.
The main screen window shows the operational status and information
The buttons on the lower half of the screen show the
operation mode
4. APPLICATION FEATURES
Manual navigation
You can use the MyDolphin™ app to manually maneuver your
specific areas and corners of your pool, by dragging the handle in the desired
directions. In this way, you can quickly and efficiently clean hard-to-reach spots.
You can also switch to Tilt mode for a more playful and realistic experience, and
maneuver your
Robotic Pool Cleaner
operational stats
by tilting the smartphone in various angles.
robotic pool cleaner remotely using
.
|
User Instructions
into
Hide quick links:
Advertisement
Table of Contents
