ASROCK GE PRO-HT User Manual page 16

Front panel audio connector
(9-pin AUDIO1)
(see p.7/p.8 item 23)
System panel connector
(9-pin PANEL1)
(see p.7/p.8 item 14)
External speaker connector
(4-pin SPEAKER 1)
(see p.7/p.8 item 17)
Chassis fan connector
(3-pin CHA_FAN1)
(see p.7/p.8 item 13)
CPU fan connector
(3-pin CPU_FAN1)
(see p.7/p.8 item 4)
ATX power connector
(20-pin ATXPWR1)
(see p.7/p.8 item 29)
Serial port connector
(9-pin COM1)
(see p.7/p.8 item 20)
This Manual: http://www.manuallib.com/file/2630978
GND This is an interface for front
+5VA
BACKOUT-R
panel audio cable that allows
BACKOUT-L
convenient connection and
1
control of audio devices.
AUD-OUT-L
GND
AUD-OUT-R
MIC-POWER
MIC
PLED+ This connector accommo-
PLED-
PWRBTN#
dates several system front
GND
panel functions.
1
DUMMY
RESET#
GND
HDLED-
HDLED+
This connector allows you
1
SPEAKER
to attach to an external
DUMMY
DUMMY
speaker.
+5V
Connect the fan cable to the
GND
+12V
connector matching the black
CHA_FAN_SPEED
wire to the ground pin.
Connect the fan cable to the
CPU_FAN_SPEED
+12V
connector matching the black
GND
wire to the ground pin.
Connect an ATX power
supply to the connector.
RRXD1
This COM1 header supports
DDTR#1
DDSR#1
a serial port module.
CCTS#1
1
RRI#1
RRTS#1
GND
TTXD1
DDCD#1
1 5