Tv Controller; Standby Mode - Samsung 8 series Installation Manual

TV Controller is a multi directional button that helps navigate without using the remote control.
✎
Some functions which require a PIN code may not be available.
✎
The product colour and shape may vary, depending on the model.
✎
Exits the menu when pressing the controller for more than 1 second.
✎
When selecting the function by moving the controller to the up/down/left/right directions, do not press the controller. If the controller is
used first, you cannot operate it to move the up/down/left/right directions.
Power on
Adjusting the volume
Selecting a channel
Using the function menu
Using the Menu
Selecting the Source
Selecting the SMART HUB ( ™ )
Power Off
✎
To close the Menu, SMART HUB, or Source, press the Controller for more than 1 second.

Standby mode

Do not leave your TV in standby mode for long periods of time a small amount of electric power is still consumed even when the power button is
such as when on holiday. off. It is best to unplug the power cord.
8
English

TV Controller

Turn the TV on by pressing the controller in standby mode.
Adjust the volume by moving the controller from side to side when the power is on.
Select a channel by moving the controller up and down when the power is on.
Press the controller when the power is on and the function menu appears. If you press it again, the
function menu screen disappears.
Selects the MENU(m) by moving the controller in the function menu screen. The OSD(On Screen
Display) of your TV's feature appears.
Selects the Source(s) by moving the controller in the function menu screen. The Source list
screen appears.
With the Function menu visible, select SMART HUB (™) by moving the Controller upwards. The
SMART HUB main screen appears. Select an application by moving the Controller, and then
pressing the Controller.
Selects the Power Off(P) to turn the TV off by moving the controller in the function menu screen.
m R
P
Function menu
The image is drawn by facing the front
Remote control sensor
When you use the Samsung Smart
Control, the standby LED does not work
(except the P button).
TV Controller
side of the TV.