How Connections Affect The Pip And Pop - Mitsubishi Electric LT-2240 Owner's Manual

How Connections Affect the
PIP (Picture-In-Picture) and POP (Picture-Outside-Picture)
To see a picture in the PIP or POP, you may need to select an input source. If the only input connected is
ANT, then both the main picture and the PIP/POP will be from that input source. If other video equipment
is connected, you may be able to view these input sources as the PIP/POP. When connecting your new
Mitsubishi TV, it is important to understand which main picture and PIP/POP input sources can and
cannot be used together. The table on this page shows which inputs can and cannot be used together and the
limitations they may have. If you press the INFO button it will display the current Input signal (480i, 480p,
720p, or 1080i), format, time, day and sleep time.
See Operation of PIP and POP, page 56, for operating instructions.
PIP/POP
(sub)
Main
ANT
Input-1
Input-2
Component-1
Component-2
480i, 480p,
720p, 1080i
MonLink/DVI
PC
22
LT2240_LT3040_OG_v6.ind
ANT Input-1
Input-2
Only with N/A
same channel
N/A Only with
same input
OK OK
OK OK
OK OK
22
Component-1 MonLink™/DVI PC
Component-2
480i, 480p, 720p,
1080i
OK OK
OK OK
Only with same N/A
input
N/A OK
OK OK
04.1.21, 4:03 PM
N/A
N/A
N/A
N/A
N/A