Connecting An Antenna To A Cable Box Or Vcr - Mitsubishi Electric LT-2240 Owner's Manual

Connecting an Antenna to a Cable Box or VCR

Note: The TV side panel and connections shown here are for reference only and may vary by model.
�� ���� ����� �������� �������
�
�������� �����
� �
�� ���
Figure 3. Connecting the cable box.
Note: See page 5 for Outdoor Antenna grounding.
�
�������� �����
�
�������
�
Figure 4. Connecting the VCR with antennas or wall
outlet cable.
Note:
If you have a digital cable box, refer to your
Digital Cable Box owner's guide for instructions on
optimal connections to this TV.
LT2240_LT3040_OG_v6.ind
����� ��� ���� �����
�������� �������
�� ���� ����� �������� �������
��� ���� ����� �������� �������
����� ��� ����� �� ����� ���
��
� � �����
�
� �
� � � � � � �
� �
���
15
Cable Box
(Figure 3)
1. Connect the incoming cable to ANT on the
TV side panel.
NOTE: If your cable box has separate audio/video
outputs, please see Composite Video with
Audio or S-Video with Audio, page 16
(Figure 6).
Antenna or Wall Outlet Cable
(Figure 4)
Connect the incoming cable to ANT on the TV
1.
side panel.
NOTE: If your cable box has separate audio/video
outputs, please see Composite Video with
Audio or S-Video with Audio, page 16
(Figure 6).
04.1.21, 4:02 PM
15