Table of Contents
Advertisement
Pairing the Wi Transmitter & Receiver
The Wi Transmitter and Receiver are paired at the factory. Perform the
following steps ONLY if you need to reestablish connection between
the Transmitter and the Receiver.
1.
First turn ON the Transmitter (Tx) and the Receiver (Rx) by pressing and
holding the POWER button
The green LED on Each unit will flash.
2.
Press and hold the LINK button
The Power/Status green LED on the Transmitter will start flashing faster.
The Transmitter is now in a Pairing mode and ready to search for the Receiver.
3.
Press and hold the LINK button
The Power/Status green LED on the Receiver will flash momentarily.
4.
Once the Transmitter links with the Receiver, the Power/Status LED on both
devices will turn to solid green.
5.
The Transmitter and Receiver are now ready for use.
v
k
,
on each of the units for 2 seconds.
p
on the Transmitter (Tx) for 3 seconds.
z
on the Receiver (Rx) for 3 seconds.
PAIRING
r
(Tx)
p
k
(Rx)
z
v
7
Advertisement
Table of Contents
