Table of Contents
Advertisement
5.
Fit your phone to the bottom
of the Samrtphone holder portion
of the Smartphone mounting adapter
6.
Start by extending the top part of
the Smartphone holder portion
and then fitting your phone in
between the bottom and the top
of the Smartphone mounting adapter.
7.
Locate the Gray 1/8" to 1/8" Smart
Device cable and Insert the Gray
1/8" TRS end of the cable into the
Wi Receiver audio output jack.
8.
Route the cable beneath the belt
clip as shown to keep the cable
clear from the camera lens vision field.
Note: Remove your phone covers especially
if you are using a large phone or your phone
might not fit perfectly in the phone holder.
n
5
o
SMARTPHONE CONNECTION
p
q
23
Advertisement
Table of Contents
