Table of Contents
Advertisement
iPad USB SETUP
Connecting to Your iPad
The optional Apple Lightning to USB Camera adapter Model
MD821ZM/A or 30-pin to USB Camera adapter Model MC531ZM/A
is required to set up your Wi AudioStream Pro with iPad.
Note: Before using the Wi AudioStream Pro with your
iPad, you need to fully charge the Transmitter batteries.
Your iPad will display the message "The attached
acessory uses too much power" if the Transmitter
is not fully charged.
1.
Make sure that the Transmitter and the Receiver are OFF.
2.
Insert the mini USB end of the USB data cable into the
USB audio interface port located on the side of the Transmitter.
3.
Insert the full size USB end of the USB data cable to the USB
port on the optional Apple iPad Camera connection adapter.
4.
Power up the Transmitter and the Receiver.
5.
Apple iPad iOS will automatically install the universal driver.
38
Apple Optional USB Camera Adapters
Apple 30-pin Adapter
Apple Lightning Adapter
Model MC531ZM/A
Model MD821ZM/A
C
1
2
3
4
5
6
Advertisement
Table of Contents
