Using The Room Limiter - CANVAC Q CLEAN R200 User Manual

Edge cleaning
(Can only be activated via the
remote control.)
When the robot vacuum cleaner is in
operating mode, press MODE and select
mode 3 for edge cleaning. The robot
vacuum cleaner then primarily follows the
edges of the room.
S-pattern cleaning
(Can only be activated via the
remote control.)
When the robot vacuum cleaner is in
operating mode, press MODE and select
mode 4 for S-pattern cleaning.

Using the room limiter

The room limiter is used to prevent the
robot vacuum cleaner going outside the
room or rooms in which you want it to
operate. An infrared beam with a reach
of around 3 metres is emitted by the room
limiter. For optimum functionality, place
the room limiter at a door opening. Insert
batteries, put the power switch into the
ON position and place the room limiter in
the desired location. Switch off the power
when the unit is not in use.
NB! Place the robot vacuum cleaner with the symbol pointing
out the line you do not want the robot vacuum cleaner to cross.
35