The Clean Button's Functions - CANVAC Q CLEAN R200 User Manual

THE CLEAN BUTTON'S FUNCTIONS/SIGNALS
A. Turn on the robot (put the power switch on the underside into the ON position). The CLEAN
button lights up in blue.
B. Press the CLEAN button. The robot vacuum cleaner beeps three times while the button is
flashing. The button changes to a fixed blue beam and the robot vacuum cleaner starts to clean.
C. Any fault is indicated by the CLEAN button flashing (see the Troubleshooting section).
D. The CLEAN button flashes red when the robot vacuum cleaner needs charging.
E. While charging (in the charging station or via the charging adapter), the CLEAN button
changes to red. When charging is complete, the robot beeps 5 times and the CLEAN button
changes to blue.
F. When the robot has been programmed for scheduled cleaning, the CLEAN button shines
pink for two seconds. To check whether the robot is programmed, press PLAN on the remote
control. If it is, the CLEAN button shines pink for two seconds. If it is not, there is no colour
change.
29