Using The Product; Getting Started; Battery Charging - CANVAC Q CLEAN R200 User Manual

USING THE PRODUCT

GETTING STARTED

Battery charging

A. Charging station location
Place the charging station against a wall. Ensure that there
are no obstacles within 1 metre of either side of the charging
station and around 2 metres in front.
B. Put the power switch on the underside of the robot vacuum cleaner into
the ON position
This will cause the display to flash, indicating that the robot is in standby mode.
C. Charge in one of the following ways
a. Connect the charging cable to the robot's charging socket and connect the charger
to the mains socket.
b. Press the HOME button on the robot or the remote control. The robot then automatically
locates the charging station.
Fig a
NB! While charging, the CLEAN button changes illumination to red. When charging is complete,
the robot vacuum cleaner beeps 5 times and the CLEAN button shines blue.
For optimum battery life
A. Charge for 12 hours before using the robot for the first time.
NB!
B. Charge the robot as soon as it indicates that charging is necessary.
C. If the robot is not to be used for a long time: fully charge the battery, put the power switch
into the OFF position and store the robot in a dry and cool place.
Starting the robot vacuum cleaner
1. Put the power switch on the machine's underside into the ON position. The CLEAN button
shines blue.
2. Press the CLEAN button on the machine's top or the ON/OFF button on the remote control.
The robot vacuum cleaner then starts cleaning. The robot beeps three times and the CLEAN
button changes to blue.
NB! If the robot is in sleep mode: press the CLEAN button twice to first wake the robot and then
start cleaning.
Fig b
28