Tools; Tools Main Menu; Information; Factory Setting - bensat HDT913AEP Owner's Manual

TOOLS

Tools main menu

1
Press the "MENU" button to enter main menu.
2
Press "UP" or " DOWN " button to highlight "Tools", press "RIGHT"
button to enter the Tools menu.
3
Press "UP" or "DOWN" cursor button to highlight the desired item
and press "OK" button to enter the sub-menu.
4
Press "EXIT" button to exit.

Information

This menu can display some parameters information in this STB.
1
In "Tools" menu, select "Information", press "OK" button to open
information window.
2
Press "EXIT" button to exit.

Factory Setting

This menu allows you to re-set the STB back to factory settings,
clear all existed channels.
1
In the "Tools" menu, select "Factory Default", press "OK" button.
You are asked to input a password(the default password is"0000").
2
A confirmation window is displayed.
Select "Yes" to return back to factory settings and clear all channels.
Select "No" to cancel back to factory settings.
3
Press "EXIT" button to exit .

Software Upgrade

We offer the functions for user to upgrade software version by OTA
or by USB .
1
Enter "Tools" menu, select "S/W Upgrade by OTA" or "Upgrade
by USB", press "OK" button, Software Upgrade menu is shown.
2 Press cursor button to select the desired item, then highlight
"Start" and press "OK" button to start upgrade.
3
Press "EXIT" button to exit.

Remove USB device safely

In "Tools" menu, select "Remove USB device safely",
Press "OK" button to confirm. Then a window is displayed.
Press "OK" button again.
English
10 1
Tools
Information
Factory Setting
S/W Upgrade by OTA
Upgrade By USB
Remove USB device safely
Information
xxx x.x.x
xxxxx xxxxx
xxxxx xxxxx
xxx x.x.x
xxx x.x.x
Factory Setting
This operation will load default and erase all
the channels that user added, continue?
Yes No
Upgrade by USB
Upgrade Mode Allcode
Upgrade File No File
Start
0%
Disk Remove
Remove USB Disk A-3 GB
OK Cancel