Table of Contents
Advertisement
Operating Instructions
Busch-ComfortTouch
Control element "KNX Audio"
With the aid of this control element all audio settings for connected audio devices can be easily controlled from
the start page.
NOTE
This control element can be added to operating pages. There, it can be created as "Bubble display"
(bubble control) (in the room view).
RGB control (basic versions, which can be adapted further)
RGB control elements can be used to define specific settings for related lamps (LEDs, Philips Hue, etc.). For
example, the colours can be switched or the amount of warm white can be adjusted.
Control element
Status
RGB control
Links in the floor plan
Links in the floor plan are used to jump to individual operating pages from the start page.
Control element
Status
Links:
Some forms are possible. They must be
– Pages
created appropriately in the project planning
– Room view
software of the Busch-ComfortTouch
– Web (Internet site)
Please contact your electrical installer who
– Camera
will set up the Busch-ComfortTouch
– News centre
individually and according to your wishes.
Operating Instructions | 1473-1-8041
®
®
.
®
for you
Function
Pressing the button on the control element switches the
lamp on and off. . Also a preset can be carried out here.
The value display shows the brightness component.
Depending on the lamp type and the default settings in the
commissioning software, additional functions can be called
up (via the arrow, as shown in the example), colour or white
control, for example.
Function
The control element of the link can be selected within the
field. This opens the operating page which was linked.
NOTE
The operating page to be linked must have been
appropriately assigned in the project planning software of
the Busch-ComfortTouch
®
. Please contact your electrical
installer who will set up the Busch-ComfortTouch
individually and according to your wishes.
Operation
®
for you
— 27 —
Advertisement
Table of Contents
