Table of Contents
Advertisement
Operating Instructions
Busch-ComfortTouch
Pos: 15.4.4.1 /Layout bis 2014-11-11/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/3. Ebene/A - F/Bedienelemente @ 20\mod_1323260220559_15.docx @ 111647 @ 3 @ 1
5.2.2
Control elements
Pos: 15.4.4.2 /Layout bis 2014-11-11/Online-Dokumentation (+KNX)/Bedienung/KNX/KNX-Aktorik/ComfortPanel 3.0/Bedienungsanleitung/Bedienungsvorgänge am Touchdisplay/BedienelementeBedienelemente @ 44\mod_1448004363441_15.docx @ 404430 @ @ 1
Control elements in the Busch-ComfortTouch
Blinds", "Value", "Scenes", RTC and "Measured values". The elements can include switches, buttons and sliders.
This makes possible the button mode, (executing the function with one press), the tipping mode (executing the
function by pressing and holding), as well as controller mode (moving a slider).
The following selection shows the most commonly used control elements available in the Busch-ComfortTouch
The type and appearance of the control elements may vary due to individual adaptation.
NOTE
The type and appearance of some control elements has been fixed and cannot be altered (e.g.
volume control). However, for some control elements (e.g. light switches) individual formats (also
icons) can be selected.
This must be appropriately activated in the project planning software of the Busch-ComfortTouch
Please contact your electrical installer who will set up the Busch-ComfortTouch
individually and according to your wishes.
Basic structures of control elements
Fig. 6:
Different statuses of the same control element
1 Status display of "Device" | 2 Designation of "Control element" | 3 Function button | 4 Status display of "Device" |
5 Function button
Control element
Status display of device [1]
Designation of control element [2]
Function button (push-button) [3]
Status display of device [4]
Function button (push-button) [5]
Operating Instructions | 1473-1-8041
®
®
are used to fulfil the basic functions of "Switching", "Dimming",
Description
The device is switched off (lettering is dark).
Light control:
Yellow
Blind functions:
Blue
Climate functions:
Orange
Scenes:
Magenta
Other functions:
Grey
The function is triggered with a press of the button (can also display the status, here: "Device
off").
The device is switched on (Lettering: white / bright).
The function is triggered with a press of the button (can also display the status, here: "Device
on").
Operation
®
.
®
.
®
for you
— 17 —
Advertisement
Table of Contents
