ABB Busch-ComfortTouch 9 Operating Instructions Manual page 26

Operating Instructions
Busch-ComfortTouch
Room temperature controller (basic versions, which can be adapted further)
Climate control units can be controlled with the control element for room temperature controllers.
NOTE
The internal room temperature controller of the Busch-ComfortTouch
control element (see room temperature controller).
Control element Status
Room temperature
controller
Philips Hue control element (basic versions, which can be adapted further)
Philips Hue control elements can be used to define specific settings for Philips Hue lamps. For example, the
colours can be switched or the amount of warm white can be adjusted. Control normally takes place using an
RGB control element.
This function is an option and only available with a corresponding plug-in. More detailed information is available
from your electrical installer. He will also carry out the commissioning process with the aid of the commissioning
software.
Miele control elements (basic versions, which can be adapted further)
With the Miele control element you have the option of transferring information and data about kitchen appliances
from Miele to the Busch-ComfortTouch
control certain appliance functions with the Busch-ComfortTouch
This function is an option and only available with a corresponding plug-in. More detailed information is available
from your electrical installer.
Sonos loudspeaker control element
Sonos loudspeaker control elements can be used to define specific settings for Sonos loudspeakers. For
example, titles can be selected from a favourites list. Control normally takes place using a KNX audio control
element.
This function is an option and only available with a corresponding plug-in. More detailed information is available
from your electrical installer. He will also carry out the commissioning process with the aid of the commissioning
software.
Operating Instructions | 1473-1-8041
®
®
and to call this information up there. It is also possible to remotely
®
is not opened via this
Function
The current operating mode and the mode (e.g. "Heating")
of the controller are displayed in the control element.
Additional operating modes can be called up with wiping
movements. Control is carried out via the buttons.
® and to implement these for KNX devices.
Operation
— 26 —