Parts Name And Functions; Control Panel - Mitsubishi Electric MDT402S User Manual

Parts Name and Functions

Control Panel

EXIT
8 7
1
POWER button ( )
Switches the power on/off. See also page 18.
2
MUTE button
Switches the audio mute ON/OFF.
3
INPUT button
Acts as SET button within OSD menu.
Selects which signal connected to the display is shown.
(Toggle switches between [RGB1], [RGB2] or [RGB3], [DVD/
HD],[VIDEO] or [VIDEO<S>]). [VIDEO<S>] is enabled by
selecting the "SEPARATE" mode in the OSD or by having
the "S-VIDEO" cable connected with the "S-VIDEO" signal
present and selecting "PRIORITY" MODE. See page 26.
4
PLUS (+) button
Acts as (+) button to increase the adjustment with OSD menu.
Increases the audio output level when the OSD menu is
turned off.
5
MINUS (-) button
Acts as (-) button to decrease the adjustment with OSD menu.
Decreases the audio output level when the OSD menu is
turned off.
6
UP ( ) button
Activates the OSD menu when the OSD menu is turned-off.
Acts as button to move the highlighted area up to select
the adjustment with OSD menu.
EXIT
INPUT
6 5 4 3
English-6
1-7
9
INPUT MUTE
10
MUTE
OFF
2 1
7
DOWN ( ) button
Activates the OSD menu when the OSD menu is turned-off.
Acts as button to move the highlighted area down to
select the adjustment with OSD menu.
8
EXIT button
Activates the OSD menu when the OSD menu is turned-off.
Acts as EXIT button to move to previous menu with OSD
menu.
9
Remote control sensor and Power Indicator
Receives the signal from the remote control (when using the
wireless remote control). See also page 9.
Glows green when the LCD monitor is in active and glows
red when the LCD monitor is in POWER OFF mode. When
the LCD monitor is in POWER SAVE mode, it will glow both
green and red. When SCHEDULE is enabled, it will blink
green. See page 19.
In the case of where a failure is detected, it will blink red.
Main Power Switch
10
On/off Switch to turn main power on/off.
Control Key Lock Mode
This control completely locks out access to all Control Key
functions. To activate the control key lock function, press both
of " " and " " and hold down simultaneously for more than
3 seconds. To resume back to user mode, press both of " "
and " " and hold simultaneously for more than 3 seconds.
Button Location
ON