Assembly Instructions - Pinnacle Products International HeatStream HS- 45-KFA User Manual – Operating Manual

- Remove the heater and all packaging materials
from the shipping carton
Cord Wraps (2)
Missing Parts? Please Call 800-641-6996 For Assistance
Carry Handle Assembly
1. Align holes in the upper housing with the 2
holes in the handle as shown in Figure 3.
2. Insert screws (13 mm) and tighten firmly.
Figure 3
© 2013, Pinnacle Products International, Inc.
NEVER LEAVE HEATER UNATTENDED WHILE BURNING OR
WHILE CONNECTED TO A POWER SOURCE
®

Assembly Instructions

Models: HS-45-KFA / HS-70T-KFA
What's In The Box
Carry Handle (1)
Note: Save the box and packaging materials
for future storage.
10 mm Screws (2)
Cord Wrap Assembly
1. Insert tabs into square slots in shell support
and line up screw holes as shown in Figure 4.
2. Insert screws (10 mm) and tighten firmly.
Tools Needed:
- Phillips Head Screw Driver
Figure 4
Kerosene Forced Air Heater User's Manual
4
13 mm Screws (2)