Wiring Diagram - Pinnacle Products International HeatStream HS- 45-KFA User Manual – Operating Manual

PUMP PRESSURE:
While heater is operating, turn adjusting screw
clockwise to increase, counter-clockwise to
decrease pressure. Correct pump pressure is as
follows:
Model Number
HS-45-KFA
HS-70T-KFA
HS-125T-KFA
HS-175T-KFA
HS-215T-KFA
Tolerance ± 10%
Pressure Valve
Figure 18
Figure 20: 45-KFA
© 2013, Pinnacle Products International, Inc.
NEVER LEAVE HEATER UNATTENDED WHILE BURNING OR
WHILE CONNECTED TO A POWER SOURCE
®
Pump Pressure
3.0 PSI
4.0 PSI
5.0 PSI
7.5 PSI
9.0 PSI
Adjusting Screw

Wiring Diagram

Maintenance
NOZZLES:
Nozzles should be cleaned or replaced at least
once per heating season. Contaminated fuel could
make this necessary immediately. To clean dirt
from nozzle, blow compressed air through nozzle
front. It may be necessary to soak the nozzle in
1-K kerosene to loosen any dirt particles.
Nozzle Face
Figure 19
Figure 21: 70T-KFA / 125T-KFA / 175T-KFA / 215T-KFA
Kerosene Forced Air Heater User's Manual
11
Nozzle
Burner Head