Carrier 58VLR Installation, Start-Up, And Operating Instructions Manual

_I_rn to the Expert£
Installation, Start-Up, and
Operating Instructions
NOTE: Read the entire instruction manual before starting the
installation.
TABLE OF CONTENTS
PAGE
SAFETY CONSIDERATIONS ........................ 1
INTRODUCTION .................................. 3
LOCATION ....................................... 3
General ........................................ 3
Location Relative to Cooling Equipment ............... 4
INSTALLATION ................................... 4
Air for Combustion and Ventilation ................... 4
Outdoor Combustion-Air Method .................... 4
Standard- and Known-Air-Infiltration Rate Methods ..... 6
General ......................................... 7
Unconfined Space ............................... 7
Confined Space ................................. 7
Ductwork Recommendations ........................ 7
Venting .......................................... 7
Oil Burner ...................................... 8
Oil Connections .................................. 8
Barometric Draft Control ........................... 9
Electrical Connections .............................. 9
Filters ......................................... 10
START-UP. ADJUSTMENT, AND SAFETY CHECKOUT 12
Operational Checkout ............................. 12
Sequence of Operation ............................ 12
Combustion Check ............................... 13
Fan Adjustment Check ............................ 14
Limit Control Check .............................. 14
For Year-Round Air Conditioning ................... 14
MAINTENANCE .................................. 14
General ........................................ 15
Oil Burner ..................................... 15
Heat Exchanger and Flue Pipe ...................... 15
Blower Removal ................................. 15
Fig. 1 -- 58VLR Low-Boy Oil Furnace
A05024
SAFETY CONSIDERATIONS
Recognize safety information. This is the safety-alert symbol
_. When you see this symbol on the furnace and in
instructions or manuals, be alert to the potential for personal
injury.
Understand the signal words DANGER, WARNING, and
CAUTION. These words are used with the safety-alert symbol.
DANGER identifies the most serious hazards which win result in
severe personal injury or death. WARNING signifies a hazard
which could result in personal injury or death. CAUTION is used
to identify unsafe practices which may result in minor personal
injury or product and property damage. NOTE is used to
highlight suggestions which will result in enhanced installation,
reliability, or operation.