Setting And Canceling The Functions - Toyota Avensis Owner's Manual



Setting and canceling the functions

Vehicles with a "touch screen"
Customization can also be done by "touch screen". (Refer to the
""touch screen" Owner's Manual".)
Vehicles without a "touch screen"
To switch between setting and canceling, follow the procedure
below.
Vehicles with smart entry & start system:
STEP 1
Close all doors and turn the "ENGINE START STOP" switch
to IGNITION ON mode. (P. 202)
Perform
Vehicles without smart entry & start system:
Close all doors and turn the engine switch to "ON" position.
(P. 206)
Perform
STEP 2
When the setting or canceling operation is complete, all the doors are
locked and then unlocked.
AVENSIS_OM_OM20B88E_(EE)
within 10 seconds.
STEP 2
within 10 seconds.
STEP 2
Shift the shift lever to P or N, and
press and hold the driver's door
lock switch (
approximately 5 seconds and
then release.
1-2. Opening, closing and locking the doors
or
The shift lever and switch posi-
tions corresponding
desired function to be set are
shown in the following table.
Use the same procedure to can-
cel the function.
1
) for
to the
77