Safety Precautions, Maintenance & Recommended Use - NEC LCD4000 User Manual

Safety Precautions, Maintenance & Recommended Use
FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE
FOLLOWING WHEN SETTING UP AND USING THE
LCD4000 LCD COLOUR MONITOR:
• DO NOT OPEN THE MONITOR. There are no user
serviceable parts inside and opening or removing covers
may expose you to dangerous shock hazards or other risks.
Refer all servicing to qualified service personnel.
• Do not spill any liquids into the cabinet or use your monitor
near water.
• Do not insert objects of any kind into the cabinet slots, as
they may touch dangerous voltage points, which can be
harmful or fatal or may cause electric shock, fire or
equipment failure.
• Do not place any heavy objects on the power cord. Damage
to the cord may cause shock or fire.
• Do not place this product on a sloping or unstable cart,
stand or table, as the monitor may fall, causing serious
damage to the monitor.
• When operating the LCD4000 LCD monitor with its
AC 220-240V power supply, use a power supply cord that
matches the power supply voltage of the AC power outlet
being used. The power supply cord you use must have been
approved by and comply with the safety standards of your
country. (Type H05VV-F 3G 1mm
Europe)
• In UK, use a BS-approved power cord with molded plug
having a black (13A) fuse installed for use with this monitor.
If a power cord is not supplied with this monitor, please
contact your supplier.
• Do not place any objects onto the monitor and do not use
the monitor outdoors.
• The inside of the fluorescent lamps located within the LCD
monitor contains mercury.
• Do not bend power cord.
• Do not use monitor in high temperature, humid, dusty, or
oily areas.
• If glass is broken handle with care.
• Do not cover vent on monitor.
• If monitor or glass is broken, do not come in contact with the
liquid crystal and handle with care.
• Allow adequate ventilation around the monitor, so that heat
can properly dissipate. Do not block ventilated openings or
place the monitor near a radiator or other heat sources. Do
not put anything on top of the monitor.
• The power cable connector is the primary means of
detaching the system from the power supply. The monitor
should be installed close to a power outlet, which is easily
accessible.
• Handle with care when transporting. Save packaging for
transporting
• Please follow the bylaws or rules of your municipality to
dispose of the tube properly.
• Please clean the holes of back cabinet to reject dirt and
dust at least once a year because of set reliability.
2 should be used in
English-3
Please follow the bylaws or rules of your municipality to dispose
of the lamps properly. Immediately unplug your monitor from the
wall outlet and refer servicing to qualified service personnel
under the following conditions:
• When the power supply cord or plug is damaged.
• If liquid has been spilled, or objects have fallen into the
monitor.
• If the monitor has been exposed to rain or water.
• If the monitor has been dropped or the cabinet damaged.
• If the monitor does not operate normally by following
operating instructions.
• Do not bend power cord.
• Do not use monitor in high temperatured, humid, dusty, or
oily areas.
• If glass is broken, handle with care.
• Do not cover vent on monitor.
• If monitor or glass is broken, do not come in contact with the
liquid crystal and handle with care.
• Allow adequate ventilation around the monitor so that heat
can properly dissipate. Do not block ventilated openings or
place the monitor near a radiator or other heat sources. Do
not put anything on top of monitor.
• The power cable connector is the primary means of
detaching the system from the power supply. The monitor
should be installed close to a power outlet which is easily
accessible.
• Handle with care when transporting. Save packaging for
transporting.
Recommended Use
• For optimum performance, allow 20 minutes for warm-up.
• Clean the LCD monitor surface with a lint-free, non-abrasive
cloth. Avoid using any cleaning solution or glass cleaner!
• Adjust the monitor's brightness and contrast controls to
enhance readability.
• Avoid displaying fixed patterns on the monitor for long
periods of time to avoid image persistence (after-image
effects).
• The lamp of backlight has a little mercury. Please handle it
appropriately in case of disposal.