Table of Contents
Advertisement
Touch Sensor 2 plus
GIRA
Info
Installation Instructions
6. Settings
The room temperature controller is operated with the
left and right contacts of the display (key 1).
The key is pressed
Change reference temperature
In normal operation, the left and right contacts of the
key ( ,
) serve to readjust the actual reference tem-
perature. This change is directly active. This change
is invalidated by a change of the operating mode
(manual or time-controlled).
Starting the programming mode
A press on the center of the key ( , "ENTER") switch-
es over after 3 s to the main menu of the programming
mode, if this feature is enabled.
Touch Sensor 2 plus
on the left,
on the right or
in the center.
ENTER
6.1 Settings
Main menu
The main menu (see fold-out page U1) permits the
selection of the controller operating mode. A press on
the the left or the right side of the key ( ,
between the individual menu items
During an input, the corresponding symbol flashes; all
other symbols and the temperature / clock display are
off.
A press on the center of the key confirms the selection
( ,"ENTER") or activates the programming menu
('level 2').
Important: Depending on the programming of the
Touch Sensor 2 plus, individual or several adjust-
ments may be disabled and are therefore not acces-
sible.
5/07
) toggles
.
Page 5 of 9
Advertisement
Table of Contents
