Checking Current Humidification And Dehumidification Set Points - Carrier THERMIDISTAT CONTROL Homeowner's Manual

OPERATING THE THERMIDISTAT CONTROL
NOTE: If 2 dashes (--) appear, your
Thermidistat Control does not include
the outdoor air temperature sensor or the
sensor is not working properly. Check
with your dealer if you are unsure.
Checking current humidification
and dehumidification set points
1
Press the SET HUM button.
The current indoor humidity (large num-
ber) is displayed along with the humidify
set point (small number).
2
Press the END button.
13