Craftsman 917.20392 Operator's Manual page 22

TO INSTALL MOWER
1. SET PARKING BRAKE LEVER AND
LOWER ATTACHMENT LIFT LEVER
• Depress clutch/brake pedal all the way
down and hold.
Pull parking brake lever up and hold,
release pressure from clutch/brake
pedal, then release parking brake lever.
Pedal should remain in brake posttion.
Ensure parking brake will hold tractor
secure.
Brake
A_,CAUTION: Ltft lever is spring loaded.
Have a tight grip on lift lever, lower it slowly
and engage in lowest position. Lift lever is
located on left side of fender.
Li_
Lever
2. ASSEMBLE FRONT GAUGE WHEEL
(W) TO FRONT OF MOWER
H. Front Mower Bracket
W Front Gauge Wheel
X Shoulder Bolt
Y. 1-1/40.D. Washer
Z. 3/8-16 Locknut
3, TURN STEERING WHEEL LEFT AND
POSITION MOWER
• Turn steering wheel to the left as far as it
will go and position mower on right side of
tractorwith deflector shield (Q) tothe right.
Front
_Engine ?
_ Transaxle
Q. Deflector Shield
4. SLIDE MOWER UNDER TRACTOR
Bring belt forward and check belt for pro-
per routing in alf mower pulley grooves.
NOTE: Be sure mower side suspension
arms (A) are pointing forward before sliding
mower under tractor.
Slide mower under tractor until it is
centered under tractor.
A. Mower Stde Sus _ension Arms
Q. Deflector Shield
i
22