SERVICE AND ADJUSTMENTS
TO REPLACE
FUSE
Replace with 30 amp automotive-type
plug-in fuse. The
fuse holder is located in the engine compartment,
directly
in front of the dash.
TO REPLACE HEADLIGHT
BULB
•
Raise hood.
•
Pul! bulb holder out of the hole in the backside of the
gritL
•
Replace bulb in holder and push bulb holder securely
back into the hole in the backside of the grill+
,
Ctose hood_
INTERLOCKS
AND RELAYS
Loose or damaged wiring may cause your tractor to run
poorly, stop running or prevent it from starting_
•
Check wiring. See electrical wiring diagram in Repair
Parts section of this manual.
TO REMOVE HOOD AND GRILL (See Fig. 27)
•
Raise hood.
•
Unsnap headlight wire connector,
•
Stand in front of tractor.
Grasp hood at sides, tilt
forward and lift off of tractor.
•
To reinstall, slide hood pivot brackets into srots in
frame.
•
Reconnect headlight wire connector and ctose hood,
HOOD
HEADLIGHT
WIRE
CONNECTOR
FiG+ 27
22