Table of Contents
Advertisement
RELAY MODE SETUP
Relay Receiver to Transmitter Mode Setup
Users can implement a RELAY configuration to extend the wireless
distance coverage or allow the wireless coverage to go around
barriers.
1.
Locate the included 1/8" to 1/8" Stereo Cable.
2.
Identify the last Receiver linked to Transmitter #1 group.
3.
Make sure that Transmitter #2 is turned OFF.
4.
Insert the 1/8" end of the cable into the Transmitter #2 1/8"
Stereo Audio IN port.
5.
Insert the 1/8" end of the cable into the 1/8" Stereo Audio
OUT port of the last Receiver in group #1.
6.
Power up the Transmitter #2 and set the channel to a different
number from Transmitter #1.
7.
Power up the Receivers for group #2 and set the channel to
match Transmitter #2 channel.
36
Transmitter
Group #2
AUDIO
DC 3.6V - 6V
GAIN
L
R
dB -20
0
+20
STEREO AUDIO IN
BALANCED
+
Receiver
Group #1
AUDIO OUT
DC 3.6V - 6V
GAIN
L
R
dB -20
0
+20
STEREO AUDIO OUT
BALANCED
+
-
-
Advertisement
Table of Contents
