Single Channel Setup - Wi Digital Systems Wi Pro AudioMatrix Owner's Manual

SINGLE CHANNEL SETUP

Single Channel Transmitter Setup
Users can wirelessly send a Mono audio signal through the
Transmitter to up to 50 Receivers.
1. Locate the included Mini XLR to Female XLR Cables.
2. Make sure that the Transmitter and the Receiver are turned
OFF.
3. Insert the mini XLR end of the cable into the Transmitter Mini
XLR Left audio channel input port.
4. Insert the full size XLR end of the cable to your mixer's main
Left output port.
5. Keep all mixer volume and transmitter Trim controls at their
minimum settings.
26