Table of Contents
Advertisement
Left & Right Channel Receivers Setup
6.
Locate the included Mini XLR to Male XLR Cables.
7.
Insert the mini XLR end of the cable into the Receiver's Mini
XLR Left audio channel input port.
8.
Insert the full size XLR end of the cable to your loudspeaker
audio input port.
9.
Repeat steps 6 to 8 for the second Receiver Right audio
channel input port.
10.
Power up the Transmitter and Receivers.
11.
The Receivers will automatically Seek-and-Link to the Transmitter
and set themselves to the Transmitter channel.
12.
Adjust the output level on your mixer, and adjust the Trim controls
on the transmitter and the receivers to hear the audio signal.
DUAL CHANNEL SETUP
31
Advertisement
Table of Contents
