Advertisement
TrOuBlesHOOTing
PrOBlem
Controller
Batteries may have been
does not
installed incorrectly
work
The Hydra does not
recognise the controller
Can not
The Hydra doesn't move
control the
Drone
The Hydra is out of control
Drone
Not enough power
Can Not
Not enough battery charge
Rise
Drone
The rotors stop if the
Landing
throttle is pulled back
Too Fast
WARNING: Do not pierce the lithium-poly battery.
ParTs
Part-01
Upper Body A
Part-05
Blade A
Part-09
PCB
www.jsfdrones.com
aftersales customer services
0345 576 0280
cause
Controller is not on
Batteries are flat
when controlled
Part-02
Upper Body B
Part-06
Blade B
Part-10
USB
sOluTiOn
Make sure that the power switch is on
Check that the batteries have been installed correctly
according to the instructions
Replace the batteries
Make sure the controller is on, and that the sticks have
been moved in the correct order
Make sure that the Hydra is switched on, and has power
Weather conditions can affect the Hydra. Only fly on still days
The Hydra needs enough power to raise off of the ground.
Increase the throttle until the Hydra lifts
Charge the battery according to the instructions above
Throttle back slowly to land the Hydra under control
Part-03
Lower Body
Part-07
Small Blade
Part-11
Main Motor (Red/Blue)
If you intend to use an unmanned
aircraft for any kind of commercial
activity, you must get a 'Permission'
from the Civil Aviation Authority, or
you could face prosecution. For more
details, visit www.caa.co.uk/uas
Part-04
3.7V250mAh
Li-Poly Battery
Part-08
Protective Cover
Part-12
Main Motor
(Black/White)
Advertisement
