Siemens gigaset se505 User Manual page 28

Quick Installation Guide
7. Select the Country in which you wish to operate the Gigaset SE505 dsl/cable from
the pick list, then click NEXT.
8. If you have selected Germany, continue from step 9. If you have selected another
country, go to step 10.
9. The next step is to select your Internet Service Provider. You can choose between
T-Online and 1&1. If you use the services of a different Internet Service provider,
select Other Provider and click NEXT. Now continue with step 10.
T-Online and 1&1:
– Enter the access data you have been given by your Internet Service Provider. Refer
to the note on page 27.
– Click NEXT. Now continue with step 13.
10. In the next screen select the type of connection you use, then click NEXT. This and
the appropriate access data can be obtained from your Internet Service Provider.
11. Enter the access data:
PPPoE
Enter the user name and password which you have been given by your Internet
Service Provider, and retype the password.
Refer to the note on page 27.
Dynamic IP address
Enter the host name, the domain name and the external MAC address of the
router. Use the default settings unless your Internet Service Provider has given
you different information.
Static IP address
Some DSL Internet service providers assign a fixed (static) IP address to your
router. Enter the IP address, the subnet mask and the gateway.
PPTP
If your Internet Service Provider has given you a fixed IP address for your router,
select the manually option next to Receipt of IP address and enter IP address
and the subnet mask you have been given.
If the router receives its IP address automatically (by DHCP), select the
automatically option next to Receipt of IP address.
Enter the other access data in the appropriate boxes.
Example for access data for an aon account with Telekom Austria:
IP address of the PPTP server: 10.0.0.138
My IP address: 10.0.0.140
My subnet mask: 255.255.255.0
Refer to the note on page 27.
12. Click NEXT.
26