Capacitor - IBM 6360 Product Support Manual

-66-
DISKETTE UNIT - Removal/Replacements
CAPACITOR REMOVAL
1. Turn the system power off.
2. Disconnect the diskette AC power cable from
connector 8.
3. Perform the Cover Removal.
4. If necessary, perform the Right Diskette prive
Removal.
5. Disconnect the AC drive motor power cable
O.
DANGER:
High voltage may be present at the capacitor terminals.
6. Remove the two insulator caps
0
from the
capacitor terminals.
7. Discharge the capacitor. by jumpering its
terminals with the large·bladed screwdriver.
8. Remove the three motor capacitor leads
0
from
the capacitor terminals.
9. Remove the screw. and remove the capacitor
bracket assembly
O.