Casio ex-zr50 User Manual page 74

. To set up the camera to shoot with Prerecord Movie
1.
Select "b" (BEST SHOT) as the recording mode (page 79).
2.
Press [MENU].
3.
Press [4], use [8] and [2] to select the " r REC MENU" tab, and then
press [SET].
4.
Use [8] and [2] to select "Movie Quality" and then press [6].
5.
Use [8] and [2] to select the movie recording mode you want to use
for shooting and then press [SET].
6.
Press [SET].
7.
Use [8] and [2] to select the "
press [SET].
8.
Use [8], [2], [4], and [6] to select the "Prerecord (Movie)" scene and
then press [SET].
This causes ‰ (Prerecord (Movie)) to appear on the monitor screen, indicating
that the camera is prerecording to its buffer.
. To shoot a Prerecord Movie
1.
After using the above procedure to set up the camera for Prerecord
Movie, point the camera at the subject.
2.
When you are ready to record, press [0] (Movie).
This will save the approximately five seconds of action that was prerecorded in
the buffer before you pressed [0] (Movie) (two seconds if you are using high
speed movie) and start real-time recording.
3.
Press [0] (Movie) again to stop recording.
• To turn off Prerecord Movie recording, press [MODE] and then select
"P" (Program Auto) or "Ÿ" (Premium Auto Pro).
• When shooting with the high speed movie "HS30-120" and "HS30-240" setting,
you cannot change the speed (fps) setting while the camera is pre-recording to
the buffer in step 1 of the above procedure. You can change the speed (fps)
setting after you press [0] (Movie) to start real-time recording.
B
" Control Panel option, and then
74
Recording Movies