Related Manuals for Wagan 2412
Summary of Contents for Wagan 2412
- Page 1 Item No. : 2412 900 Amp Battery Jumper ™ User’s Manual We are constantly improving our products so specifications are subject to change without notice. Visit our website for the latest product information.
-
Page 2: General Warnings
900 Amp Battery Jumper by Wagan Tech ™ ® Thank you for purchasing the 900 Amp Battery Jumper by Wagan Tech . With normal care and ™ ® proper treatment, it will provide years of reliable service. IMPORTANT INFORMATION • Please read and understand all warnings, cautions, and notes included in this manual... -
Page 3: Product Features
Charging Time (DC—with engine running) 12 hours Dimensions WxLxH (inches) 11.0 x 8.5 x 10.0 Weight (lb) 16.5 AC Charging Adapter Output 12V, 500mA DC ©2015 Wagan Corporation. All Rights Reserved. Wagan Tech and wagan.com are trademarks used by Wagan Corporation. -
Page 4: Front View
900 Amp Battery Jumper by Wagan Tech ™ ® FRONT VIEW 1. DC Socket Power Switch 6. Worklight 2. Battery Status Indicators 7. Worklight Switch 3. Battery Status Button 8. Charging Jack 4. DC Socket 9. Charging Indicator 5. Polarity Indicator... -
Page 5: Rear View
10. Air Compressor Switch 11. Pressure Gauge 12. Jumper Cable (negative) 13. Air Vent 14. Jumper Safety Switch 15. Air Compressor Hose 16. Jumper Cable (positive) ©2015 Wagan Corporation. All Rights Reserved. Wagan Tech and wagan.com are trademarks used by Wagan Corporation. -
Page 6: Battery Status
900 Amp Battery Jumper by Wagan Tech ™ ® BATTERY STATUS The color LED indicators on the front of the unit provide the current state of charge on the internal battery. It is the user’s responsibility to periodically monitor the battery’s status and recharge every 3 months in addition to recharging after each use. - Page 7 3. Turn off the vehicle ignition and accessories (e.g. radios, lights, air conditioners), and disconnect all devices such as GPS and mobile phones or tablets. 4. Turn off all Battery Jumper switches and disconnect all accessories. ©2015 Wagan Corporation. All Rights Reserved. Wagan Tech and wagan.com are trademarks used by Wagan Corporation.
-
Page 8: Air Compressor
900 Amp Battery Jumper by Wagan Tech ™ ® 5. Determine the polarity of the vehicle’s battery terminals. The positive (POS, P, +) battery terminal is usually larger in diameter than the negative (NEG, N, −) terminal. If you are unsure, you should refer to the vehicle owner’s manual. -
Page 9: Dc Output Socket
6. After use, turn the DC socket power switch off and disconnect the accessory plug from the DC socket. 7. Replace the dust cover. 8. Recharge the Battery Jumper as soon as convenient. ©2015 Wagan Corporation. All Rights Reserved. Wagan Tech and wagan.com are trademarks used by Wagan Corporation. - Page 10 900 Amp Battery Jumper by Wagan Tech ™ ® WORKLIGHT You may operate the worklight and DC socket at the same time. 1. Set the Worklight Switch to the “|” position. 2. The worklight will illuminate. 3. Turn the light off when it is not in use.
- Page 11 Product is warranted to the original purchaser for a period of one (1) year from the original purchase date, to be free of defects in material and workmanship. WAGAN Corporation disclaims any liability for consequential damages. In no event will WAGAN Corporation be responsible for any amount of damages beyond the amount paid for the product at retail.
- Page 12 31088 San Clemente Street Hayward, CA 94544, U.S.A. Tel: +1.510.471.9221 U.S. & Canada Toll Free: +1.800.231.5806 customerservice@wagan.com www.wagan.com ©2015 Wagan Corporation. All Rights Reserved Wagan Tech and wagan.com are trademarks used by Wagan Corporation REV20151217-E...