Getting Started; Remote Control Setup; Hooking Up To Tv - Schwaiger iDockStation User Manual

Getting Started

Remote Control Setup

Replacing Remote Control Battery
1. Remove the battery by pressing the latch of the cover and pull it outwards.
2. Replace the battery by pushing the cover inwards until a "click" sound is heard.
NOTE:
•Confirm correct polarity of the batteries. Improper battery installation can damage
the unit.
•Remove the battery if not used for an extended period of time.
•Do not make a short circuit between (+) and (-) polarities of the battery.

Hooking Up to TV

iDock Station Real Panel
1. Mini USB : Charge & sync with USB cable connected to the computer or adaptor.
2. AV Out : Connect to the TV with the 12-pin connector.
3. Reset : For restoring to factory settings, and switch video-out connection between
composite and component.
4
iDock player rear panel