Table of Contents General Information In the Box Preface Features Precautions Getting Started Remote Control Setup Hooking Up to TV Optional Connections First-Time Setup First-Time Setup Remote Control Buttons Instructions for Installation Site Safety and Installation Instructions Instructions for Mains Connection Instructions on Handling Batteries CE-Identification Disposal Instructions for Packaging...
General Information In the Box Size and weight Ports and Interfaces •Length: 140 mm •Mini-USB Port (for charging and syncing) •Width: 100 mm •12-Pin Connector (for connecting to TV) •Thickness: 30 mm •Built-in IR Receiver •Weight: 277 grams •Reset Button (for switching between CVBS and YUV videoout connection, and reset to factory settings) In the Box Power Specifications...
Preface iDock Station allows any iPhone 4 / iPod Touch 4G / iPad / iPad 2 to be used as a Media Center when docked to the station. You can enjoy your computer contents on the TV wirelessly with your home network. Operating the TV user interface is design with simplicity in mind an setting up require little or no configuration needed.
Getting Started Remote Control Setup Replacing Remote Control Battery 1. Remove the battery by pressing the latch of the cover and pull it outwards. 2. Replace the battery by pushing the cover inwards until a “click” sound is heard. NOTE: •Confirm correct polarity of the batteries.
Connecting to the TV 1. Plug the 12-pin connector to the AV Out port of the dock. 2. Plug the red, green, and blue video connectors into the component video input (YPbPr) ports on the TV. 3.Plug the white and black audio connectors into the left and right audio input ports, respectively, on your TV.
First-Time Setup iDock Station require 2 software applications to be installed: 1. JPlay TV app on your iPhone 4/iPod Touch 4G/iPad/iPad 2 and 2. Media Center application on your Windows PC or Macintosh. Installing JPlay TV App 1. Dock your iPhone 4/iPod Touch 4G/iPad/iPad 2 to the station.
First-Time Setup 6. Additional setup on the iPhone , iPod or iPad as follows: select setup , general and go to TV out. Here you are able to select wide screen on or off and Pal or NTSC , for Germany please select Pal.
Page 10
6. Upon completion, press the “Power” button on the remote control to launch the app. 7. Follow the setup video to setup the Media Center IMPORTANT! Media Center Application - Go to http://www.idockstation.de and get the appropriate installer for your computer. (Go to: Download application)
Page 11
After your download you are able to start the media center and the folder you like to stream (music, photos or films). Now you can watch your chosen media on your TV after streaming it with the iDock Station. The app is located ( round symbol) on the top right side of the Mac Computer and at the bottom on the right side of the windows PC.
Page 12
Click on the photo folder and follow the same setup as already done in the movie folder (see above). The formats are PNG and JPEG. Datas are added to the media center still available even the computer is switched off and on again. Datas can be deleted , just mark the files you want to delete , select the remove folder and delete the file.
Page 13
After you installed the App successfully, you can start it. The App shows all your computers which are logged in into your house network (in this case: Axel`s MacBook Air (4)) So now choose the Computer which you want to stream with and select films, music or photos. Please recognize that all components have to be connected to the same network.
Remote Control Buttons Juzz PlayTV Operations This operations are used for interacting with the TV User Interface. (Standby) : Switch on the application. : Navigate the items in the menu. 3. Enter: Select the item 4. Menu: Return to the previous menu. : Not in use.
Safety and Installation Instructions All the devices distributed by us comply with the applicable safety regulations and are absolutely safe under normal use. Please note the following instructions to avoid potential hazards, damage or malfunctioning: Instructions for Installation Site The emerging heat during operation must dissipate through adequate air circulation. Therefore the device should not be covered or placed in a closed cabinet.
Do not place containers with liquids, e.g. flower vases on the device. This could lead to accidents and leaking fluids can cause serious hazard and lead to the risk of an electric shock. The device must not be placed in the vicinity of equipments which generate strong magnetic fields (e.g. motors, loud speakers, transformers).
The installation of the system must comply with the applicable national safety regulations for electrical installations or by a specialist. If the unit is not used for a longer period of time, for e.g. before embarking on a long trip, pull the power plug from the socket. Instructions on Handling Batteries You can also remove the batteries (if any) from the device or remote control, since this leakage can damage the device.
Instructions for Warranty The warranty begins on the date of purchase of the device and is for 2 years. In this time you may verify your complaint with the proof of purchase (sales receipt, invoice, delivery note, etc.). Please retain these documents safely. Please bring the device to your dealer incase of repair or sent it there.
Page 21
Customer service form. Please attach a copy of the purchase receipt! Absender Bitte Blockschrift in GROSSBUCHSTABEN Fault indication: Surname Name Street City Phone Model: □ IPMD1 Schwaiger GmbH Hotline: □ IPMD2 Würzburger Straße 17 +49 9101 702-299 90579 Langenzenn Signatur www.schwaiger.de service@schwaiger.de...