Table of Contents
Advertisement
U s e r M a n u a l D r e a m b o x D M 7 0 2 5
14.
TV-Mode setup
A four digit device code is selected from the device list and entered into the remote control.
The most recent device list can be found on our website.
SHIFT / SETUP-Button
Numeric-Keypad
14.1 Programming the remote control
-
Press the TV-Mode-Button once.
-
Press the SHIFT/Setup-Button for 3 seconds,
the TV-Mode-Button will flash twice.
-
Use the Numeric-Keypad to enter the four digit device code into the remote control.
The TV-Mode-Button will flash once for every digit you enter. Once you have entered all
four digit the TV-Mode-Button will flash twice.
-
The remote control exits the programming mode automatically.
-
If no code is entered within 10 seconds the remote control will exit the programming
mode automatically.
- 77 -
english
TV-Mode-Button
Advertisement
Table of Contents
