Table of Contents
Advertisement
U s e r M a n u a l D r e a m b o x D M 7 0 2 5
Explanation remote control buttons
SHIFT / SETUP-Button
The SHIFT/ SETUP-Button is used to preprogram the remote control to operate a TV.
See chapter 14. TV-Mode setup.
Power-Button
The Power-Button switches your Dreambox on and off.
See chapter 4.1 Turning your Dreambox on and off.
DREAM-Mode-Button
The DREAM-Mode-Button switches your remote control into Dreambox control mode. It will
shortly light up once your press the button.
TV-Mode-Button
The TV-Mode-Button switches your remote control into TV control mode to control your
preprogrammed TV. It will shortly light up once your press the button.
See chapter 14. TV-Mode setup.
Numeric-Keypad
Enter a service number to directly access the option by using the Numeric Keypad. The
service numbers are on the left side of the service list.
The Numeric Keypad can also be used to enter the teletext page number when you are in
TV-Control-Mode and if your TV is teletext capable. The TV station has to submit teletext
information; otherwise this feature cannot be used.
Arrow-Left-Button
The Arrow-Left and Arrow-Right-Button enable you to jump back and forth between the
last 20 channels you have watched. If you have selected a sub service (see chapter 4.6) you
can use these buttons to switch to the next sub service.
Arrow-Right-Button
- 15 -
english
Advertisement
Table of Contents
