Table of Contents
Advertisement
U s e r M a n u a l D r e a m b o x D M 7 0 2 5
10.5 RF output
If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD
menu. Navigate to the option "Setup" and press the OK-Button to select.
Navigate to the option "System" and press the OK-
Button.
The "System" menu will open up.
Navigate to the option "RF output" and press the OK-
Button.
Connect a TV to the UHF-out using a coaxial cable.
Start a channel scan on your TV. The UHF-
Modulator is set to channel 36.
If this channel conflicts with any other existing
devices you can easily change it.
Use the Navigation-Buttons left and right to
change the values.
Press the green Options-Button to save the setting
or the red Options-Button to discard them.
- 57 -
english
Advertisement
Table of Contents
