Connect An Ethernet-Enabled Device; Use The Extender In Access Point Mode - NETGEAR WN3100RP User Manual

N300 WiFi Range Extender

Connect an Ethernet-Enabled Device

After the extender is connected to your existing WiFi network, you can connect a wired
device to the extender using an Ethernet cable. The device can then access your existing
network through the extender's WiFi connection.
Figure 3. Rear panel Ethernet LAN port

Use the Extender in Access Point Mode

You use the extender as a WiFi access point, which creates a new WiFi hotpsot by using a
wired Ethernet connection.
Figure 4. Extender in access point mode
Get Started
14