Table of Contents
Advertisement
5
AUDio tUning/
CD ControL
To seT and play a cd
†
Single CD Player
Insert a CD into the CD slot
A
or press the CD button
B
with a CD in the player.
C
The CD indicator will turn
on, then the CD player will
begin playing.
6-Disc CD Changer
B
Press the CD button
and
i
the CD mode is selected.
CD playback will be started.
Press the disc select button
g
to listen to your desired disc. Each indicator light on each
disc select button
shows the condition of each disc slot.
g
Light off: No disc
Amber:
Disc is set
Green:
Disc is played (or selected)
To play mp3 cd
†
Single CD Player
Insert an MP3 CD into the CD slot
or press the CD button
A
with an MP3 CD in the player. If an MP3 CD is already in the
slot, playback will start. The folder number and the track
number will appear on the display.
6-Disc CD Changer
Press the CD button
if MP3 CDs are already in the CD
B
changer; playback will start. The folder number and the
track number will appear on the display. Turn the
TUNE/FOLDER dial
clockwise or counterclockwise
h
to select your desired folder.
To ejecT disc
†
Single CD Player
Press the EJECT button
; the CD will stop playing and the CD
C
will be ejected. The system then will switch to the radio mode.
6-Disc CD Changer
Press the LOAD/EJECT button
select buttons
to select the slot where you wish to eject the
g
disc.
To selecT TRack
†
Use the SEEK/TRACK button
or to fast forward or fast reverse the disc: press the
side of the SEEK/TRACK button until the desired track is
A
g
D
J
E
h
F
B
†
To scan cd
Single CD Player
Press the SCAN button
and the first ten seconds of each track of the CD will play.
6-Disc CD Changer
Press the SCAN button
the first ten seconds of each track of the selected disc will play.
B
To exit SCAN mode, press the SCAN button again.
†
To RepeaT a cd TRack
Press the RPT/RDM button
when the system is in repeat mode.
To Randomly play cd TRacks
†
Press the RPT/RDM button
turn on when the system is in random mode. If it is an MP3 CD,
tracks selected randomly from all folders in the disc(s) will be
played back.
Radio
To lisTen To The Radio
†
1) Press the PWR dial
on and off.
, then press one of the disc
C
to select a desired track
D
or
reached. The TRACK indicator will
display the number of the selected
track.
†
To FasT FoRWaRd
Hold down the
side of the
SEEK/TRACK button
D
for more than one second.
To FasT ReveRse.
†
Hold down the
side of the
SEEK/TRACK button
D
for more than one second.
. The SCAN indicator will come on,
E
. The SCAN indicator will come on, and
E
. The RPT indicator will turn on
F
. The RDM indicator will
F
or AM-FM button
to turn the radio
i
J
(2) Press the AM-FM button
to select the
J
desired band.
(3) Press the
or
side of the SEEK/TRACK button
tune to a station or press one of the memory select buttons
recall a station memorized for that button.
† To selecT Band (am-Fm)
Press the AM-FM button
to select the desired band (AM/FM1/
J
FM2).
Satellite Radio
(if equipped)
Press the AM-FM-SAT button
to select the desired band
J
(AM/FM1/FM2/SAT1/SAT2/SAT3/SAT4).
† To Tune The Radio
Automatic Tuning
Press the
or
side of the SEEK/TRACK button
and reception of the station selected will begin. You
can automatically receive available stations, and hear
their programs.
Manual Tuning
Turn the TUNE/FOLDER dial
clockwise or
h
counterclockwise. The radio station will be changed
consecutively by the operation.
To sToRe a Radio sTaTion in The memoRy
†
(1) Press the
or
side of the SEEK/TRACK button
turn the TUNE/FOLDER dial
to the station you wish to keep
h
in the memory.
(2) Press one of the memory select buttons
hear a beep. The memory button number and the station
will appear on the display. Six stations can be stored in
each button for each band.
To Recall a pRe-selecTed Radio sTaTion
†
(1) Press the AM-FM button
to select the desired band.
J
(2) Press one of the memory select buttons
station pre-selected for that button.
†
To scan availaBle Radio sTaTions
Press the SCAN button
. The SCAN indicator will come
E
on and the radio will tune consecutively to each available
station for about five seconds per station. Press the SCAN
button again to stop scanning.
to
D
to
g
,
D
or
D
until you
g
to recall a
g
Hide quick links:
Advertisement
Table of Contents
