Screen Functions And Operations - Mitsubishi G-50A Operating Manual

(5) Click on
The message "Close the malfunction log display? " will be displayed.
Click on
is clicked, the Main Screen is returned.
Note: When G-50A is connected to the system, the malfunction log of OC is eliminated.
Please check the malfunction log in G-50 to check the malfunction log of OC.

3.8.2 Screen Functions and Operations

(1) Click on
Click on
The unit attributes are displayed at this time.
(If there is no unit at the address given, the attributes are not
given.)
Once the address has been set, click on
The units are changed.
If there is no unit at the address given, the message "Unit doesn't
exist in this address. Retry again." will appear.
Click on
(2) Click on
Click on
(3) "Menu Bar"
The menu bar displays [File] and [Help].
- By clicking [File] and then selecting "Save as ..." from the sub-menu, the Malfunction Log data will
be output and saved in the CSV format. This data can not be viewed on the offline screen.
- Click on [File] and then select "Return" from the sub-menu to end the Malfunction Log Screen
and return to the Main Screen.
- Click on [Help] and an explanation about "Terminology" and "Operation Method" will be appear.
[Refer to 3.6 Connecting Information 3.6.2 (2)"Menu Bar"]
* The error history being memorized by G-50 can also be monitor-displayed.
(Display can not be performed when connecting with MN Converter.)
The system controllers other than G-50 can not provide the monitoring of error history.
to end the Malfuncion Log Screen.
to end or click on
and the Address Change Screen appear.
to change the address.
to return to the Address Change Screen.
and the message "Clear the malfunction log. Is it OK?" will appear.
to clear or click on
to not end.
.
to not clear.
38