Clearing A Stored Channel - Whistler WS1010 Owner's Manual

CLEARING STORED CHANNEL
Unlocking All Service Bank Frequencies
1. Hold down L/O
during a Service Bank search. L-r appears.
2. While holding down TUNE/CLEAR, press
/
L/O L/O RV W. FLo ALL–CL appears for about
two seconds. Then the display alternates with YES
--- Ent and No -- CLEAr.
3. Press ENT. L-r EMPty appears. The scanner clears
lock-outs from all frequencies in the Service Bank.

Clearing a Stored Channel

To remove a frequency stored
in a channel.
1. Press SCAN/MAN to stop
scanning.
2. Press the number keys to
enter the channel number
(1–200).
3. Press PGM. PGM appears.
4. Press 0 then ENT. The
frequency number
changes to 000.000
indicate the channel is cleared.
5. To clear another channel, use the number keys
to enter that channel number then press PGM
again. Or, repeatedly press PGM until the desired
channel number appears. Repeat Step 4.
/
L/O RV W for about two seconds
to
0
21
1
2,4,5
3,5
4