Understanding The Keypad - Whistler WS1010 Owner's Manual

Understanding the Keypad

– Spectrum Sweeper.
PSE (Pause) – Stop and restart a search or tune.
– Search the preprogrammed marine bank.
MAR
– Search the preprogrammed fire/police bank.
FD/PD
– Search the preprogrammed aircraft bank.
AIR
– Search the preprogrammed amateur radio bank.
HAM
– Search the preprogrammed weather bank, or
WX/
hold to jump to the Skywarn channel. (First, program
your local Skywarn frequency into channel 200).
SCAN / MAN (Manual) – Press to scan programmed
channels. Press again to monitor a single channel.
  – Select the direction for searching and scanning.
PRI / ALERT – Set the priority feature, or set SAME
standby mode when monitoring a weather channel.
0–9 – Input numbers or select banks (0 selects bank
10). The number range above the keys (1–20, 21–40, 41-
60, etc.) indicates the channels stored in that bank.
• / DELAY – Input a decimal point or set a channel delay.
ENT (Enter) – Complete the entry of a frequency.
/
L/O L/O RV W – Lock-out selected channels or
frequencies. Review locked-out frequencies.
TUNE / CLEAR – Enter Tune search. Clear an incorrect
entry.
PGM – Program frequencies into channels.
/ – Locks (and unlocks) the keypad to prevent
accidental entries; turns the backlight on and off.
KEYPAD
11