Base Settings From Handset - AT&T E2520 User Manual

91-000020-021-000-E2520 Manual-ENG.qxd
HANDSET 1
REDIAL MENU MEM
CALLS LOG
HANDSET SETTINGS
SET TIME
CLOCK MODE
^ V
OK
SET TIME
CLOCK MODE
REGISTER
BASE SETTINGS
^ V
OK
TONE/PULSE
RINGER MELODY
^ V
OK
TONE
PULSE
^ V
OK
TONE
PULSE
^ V
OK
2/13/1950
Telephone Operation

Base settings from handset

Base Settings Menu in Handset
This menu allows the user to set Tone/Pulse and Ringer
Melody on the base by handset.
Tone/Pulse
You can choose Tone or Pulse dialing for the base and
all registered handsets. The factory default setting is
TONE. Change this to PULSE only if you do not have
touch-tone dialing service.
At the handset: Follow the steps at the left to use hand-
sets to select between Tone or Pulse.
At the base: Press * button three times to enter pro-
gramming mode. You will hear a happy tone. The IN
USE and SPARE BATTERY lights will flash. Press 0
to select between Tone or Pulse. If you select Tone,
the IN USE light will turn on. If you select Pulse, the IN
USE light will turn off. Press # to confirm your selec-
tion.
16
7:21 PM Page 16